Differential removal?

[hostilestealth]

Okay I ahve my transmission out and I have the cover off, and already remved the two bolts that hold the bracket on the bearing(the small side)

Is the part with 4 bolts and two small tabs on the passenger side supposed to pop out.

Or am I supposed to take the differental apart inside (The 4 or 5 bolts ont he larger gear.

For some reason I can't find any in depth instructions for the atx removal and the manual isn't the same.

[hostilestealth]

I figured it out, you just need to pull the part that covers the bearings on the side. Then use a pry bar and a hammer and tap the plate on the right side until it comes undone. I guess it just took some better tools than I had :)